Dual-Direction Torque Wrench
Product Specification:
Measuring Range: 10-60Nm
Length: 311mm
Accuracy: ± 3%
Weight: 0.84kg
Product Includes:
1 x 3/8″ Drive Torque Wrench
1 x 1/4 inch adapter converter
1 x extension
1 x box
1 x Calibration certificate
1 x Instruction manual
How to use?
1.Pull down the lock knob and hold it. The wrench is unlocked.
2.Turn the handle to set the torque while holding the lock knob. Clockwise increase value, counterclockwise decrease value.
3.After setting the required torque, release the hand, and the button will bounce back and lock the handle.
4.Turn the handle left and right to make sure the wrench is locked and start using.
(The minor scale may move a small amount to either side of the centerline mark without affecting the accuracy of your setting.)
5.Rotate the wrench clockwise, when you hear the”click”, it means that you have reached the required strength.
6.After use, reset the torque wrench to 0 to maintain its life.