Brand: Alfa Pasca
Appearance: 3K matte
Weight: approx. 210 g.
the material : carbon fiber
Colour: black.
Diameter: 27.2 / 30.8 / 31.6 mm.
Length : 350/400mm
Suitable for: mountain bike/road bike
Friendly reminder: 1, to fix the product correctly, follow the specified tightening torque (4Nm). 2, tighten the screws. Because it is made of carbon, it is recommended to tighten the body to support it using your hands to tighten. Under strong tension, cracks can occur
Precautions : Since the seat of the frame is 27.2mm, you need to buy a seat post less than 27.2mm for installation
We produce all the diameters of the saddle tube, which are smaller than the size of the label. The diameter of the seat post is 26.8~27.2mm. Used in the 27.2mm seat post frame. The diameter of the seat post is 30.6~30.8mm and used in the 30.8mm seat post frame. The diameter of the seat post is 31.4 ~ 31.6 mm. Used in 31.6mm Seatpost Frame Some customers buy that the diameter of the frame seatpost is not standard, so the seatpost cannot be installed. Please check whether the seat post should be properly secured with the seat clamp.
Alfa Pasca MTB Seatpost 31.6 Carbon Offset Seat Post Carbon 350 mm Matt Carbon Seat Post
¥18,540
- 1. Material: Full carbon, dimensions: 27.2/30.8/31.6 x 350/400 mm, Weight: approx. 210 g, Angle: offset 25 mm, Appearance: 3K matt; To fix the product correctly, follow the specified tightening torque (4Nm)
- 2.This product is suitable for attaching to a saddle with hole. If there is no hole in the saddle, we recommend using a hex wrench to tighten the screw.
- 3. The saddle can be adjusted by adjusting the bicycle seatpost screws on the front and back of the clamp seat to adjust the saddle angle in small increments. It can adapt to different needs on the road and adjust a comfortable seating position. The carbon fiber seat post is compared to the aluminum alloy seatpost: lighter. Much more beautiful in appearance. Bright colours. Increased pressure resistance. Anti-shock
- 4.Tighten the screws. As it is carbon, it is recommended to tighten the body to support it by squeezing with your hands. Cracks may occur when strong tension occurs.
- 5. The clip seat part is made of high-strength aluminum alloy, one-piece printed, safe and durable; Top and bottom clip parts structure, support arch cushion. Suitable for arc size: 6*6mm/7*7mm/7*9mm/7*9mm/7*10mm/8*10mm.
In stock
Additional information
| Weight | 0.2 kg |
|---|---|
| Brand | Alfa Pasca |