This ½” brass motorized ball valve is a perfect item for the clever DIY enthusiast, but is strong enough to be used in industry. The body and the valves itself are made of quality brass. The valve will fully open or fully close in less than 5 seconds. While this doesn’t have the same instantaneous open and close action that a solenoid valve comes with, the trade off is sustainability. This valve expends no energy once in position, so it can be run continuously without ever overheating. The beautiful brass design is great for home automation systems and water irrigation systems. The three wire setup allows for two points of control, which is especially important in automation systemsifications Valve Material: Brass Ball Seat: PTFE Seal: EPDM Close/Open Time: 3-5 Seconds Working Voltage: 9-24V AC/DC Max Power: 2 W Max Torque: 2 N m Max Pressure: 1.0 MPa Temperature range for Flow Medium: 0°C to 90°C Ambient Temperature Range: -10°C to 40°C Enclosure Rating: IP65 Life Expectancy: 80,000-100,000 Cycles Bore Type: Full, 15 mm Thread Type: GCan not be used in strong acid, strong base, waste water, industrial gas and other media containing many impuritiesING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. And it is not allowed to be installed in potable water pipelines.
U.S. Solid 1/2″ Motorized Ball Valve Brass Electrical Ball Valve DN15 with Full Port, 9-24V AC/DC, 3 Wire Setup
$110.99
- G THREADING- 1/2” Brass threading, manufactured and measured according to British Standard Pipe Thread.
- 9V-24V AC/DC- Works effectively over entire voltage range; Will open or close valve in 3-5 seconds; No power expended once fully open or fully closed.
- 3 WIRE, 2 POINT CONTROL SETUP- Simple three wire connection, with two points of control; No energy expended once in position.
- ALTERNATIVE TO SOLENOID VALVES- Automatically cuts off power once fully open or fully closed; This reduces likelihood of overheating, making it a great alternative to solenoid valves for projects where a valve needs to be open for an extended period of time.
- RELIABLE- Lifespan of 80,000-100,000 cycles means a valve that will last.
In stock
Additional information
| Weight | 0.44 kg |
|---|---|
| brand | U.S. Solid |
| dimensions | 11 x 9 x 9 cm |