Specification: Weight: 18g/0.6oz Common interface load: AC 250V/10A, DC 30V/10A Module Size (L*W*H): 50*26*18.5mm/2*1*0.7inch Bolt Hole: 3.1 mm; 44.5*20.5mm (spacing) Voltage: 5V, 12V, 24V (Optional) Module interface: 1. DC + : connected to the positive pole of power supply (voltage is required for relay, 5V, 12V and 24V for choice) 2. DC- : connect to the power negative pole. 3. IN: high or low level control relay suction Relay output terminal: 1. NO: relay changeover interface,relay suction front suspension, suction and COM short connection. 2: Relay common interface. 3: Relay normally closed interface,relay suction and COM short joint, suction clearance. Package List: 1 x Relay Module
Optocoupler Relay Module Board，5V/12V/24V Relay Module High & Low Trigger Module for Arduino (24V)
$21.99
- Make sure this fits by entering your model number.
- √[Powerful driving force]: The relay module uses chip optocoupler isolation, which has powerful driving capability and stable performance. The trigger current is 5mA.
- √[Jumper Setting]: 1 Each path of the Channel Relay Module can be triggered by a high level or low level by a jumper setting.
- √[Friendly design]: Low level trigger relay module power indicator (green) and one-way relay status indicator (red). User-friendly interface design, all interfaces can be directly connected through the terminal leads. Four fixing bolt holes are provided.
- √[Alternative]: The Optocoupler Relay Module Board adopts a fault-tolerant design, and the relay will not move even if the control line is disconnected.
- √[Select a variety of]: High & Low Trigger Module can work at 5V, 12V and 24V.
In stock