Step by step:
1 the nail file to shape the surface of the nail.
2. Apply primer. Cure with UV/LED lamp.
3 the correct shape of the nail.
4. Apply a sufficient amount of Poly nail gel to the nail plate model.
5. Apply the glass gel to the nail model with an average using a brush.
6. Put the cop on your nail. Cure with UV/LED lamp.
7. After drying, remove the nail plate model and spread a molding.
8. Apply top coat. Cure with UV/LED lamp.
9. Complete.
questions and answers
Q: Why can’t the nail extension gel dry?
A: Friends, you need to light up the front and back of the nail lamp for 120 seconds. Because the colored Poly Nails Gel slowly absorbs the light, the lighting time needs to be longer, which is normal.
Q: Why is it sticky?
A: After you finish the nail extension gel, you can wipe both sides of the nail with slip solution or nail cleanser to remove the sticky layer.
Q: Why are my nails falling off?
A: 1. Before making nail designs, you need to polish the nail surface, make sure the nail surface is clean and grease-free, and then apply the base coat to enhance the gel’s adsorption power.
2. Make sure the gel on the nail has dried under the lamp.
3. The finished nail style should not be soaked in hot water for a long time, otherwise it will fall off easily.
Q: How to shape nail extension gel with slip solution?
A: The brush should not be too dry or too wet. Squeeze gently and remove excess gel that has popped out of the side walls.
NO