Baas Bikeparts on-board socket USB-A/USB-C 2 x 3.6 A USB11 USB twin on-board socket with high charging power for the large USB and the small USB-C connection. Details: for operating and charging navigation systems, smartphones or cameras as well as other electronic devices with USB or USB-C plug. Converts the 12 V or 24 V input voltage to 5 V for the USB standard by a maximum of 3 V. 6 A Charging current The lid closes the socket when not needed, protects it from dirt and splashing water. Flexible installation. With angle holder for mounting on the handlebars, frame pipes or for screwing on. Can be installed in cladding or in other surfaces. Only a hole with 27 mm diameter must be placed in the appropriate place by the large nut on the holder or in the installation location (cladding). back so good Protected against water and dirt. Includes optionally usable. Safety cable with ring eyelets for connection directly to the battery. Dimensions (approx. Diameter head with/without lid: …/34 mm. Height head with lid over installation level/from bracket: … mmInstallation depth/depth from mounting angle: …/… mmInstallation diameter: 27 mm Width x height bracket angle: 36 x 32.5 mm diameter, screw connection/cable tie holes in holding angle: 4 mm. Distance between holes centre/centre in width/height: 25.4/22 mm. Width of holding angle from handlebar: 39 mmCable length: 1500 mm. Cable cross section: 1 mm² inner diameter ring eyelets: 6.5 mm, weight: 82 g, connection: red = plus + black = mass options: if you want to attach the socket more solidly to the handlebars, there is an optional robust clamp (ZAH) suitable for handlebars with 22, 25.4 and 28 m