lThings patio screws with round head made of stainless steel are excellent for all plastics,
Chipboard and hardwoods (terrace construction). With the help of the tumbl-free Torx drive and the high-quality
The sliding coating makes screwing easy. The drive TX hexagon socket allows
Place until the screw is countersunk a simple and safe screwing. The Niro
Wood construction screws with cutting notch and peeling ribs are versatile and guarantee high resistance to
Environmental influences due to their INOX material.
Official European technical approval ETA
To avoid splitting or other damage to hardwoods or thin profiles, we recommend
NietFullThings for countersunk screws. To make the right
drill size we recommend the following formula for maximum hold: screw diameter x
0.6 Example wood screw diameter 6 mm x 0.6 = 3.6 ~ 3.5 mm drill pre-drill. In most cases, you need to
Do not pre-drill.
60 mm long stainless steel terrace screw, TORX cutting groove, lens head and shaft ribs, made of V2A, 5 mm thick 60 mm, screw length, 10 pieces, 39 mm, part thread, wood screw, terrace screw, 5×60 mm
$24.99
- Product quality: stainless steel terrace screws, also stainless steel facade screws, are available in material classes C1, V2A and V4A. The V2A screws are one of the weather-resistant and corrosion-resistant screws made of stainless steel. The screw range is ideal for ipe, teak, cumaru and sucupira wood. The round head screws are the right choice for every professional craftsman and leisure screwdriver.
- Technical data (see pictures): length (l) = 60 mm | head diameter (dk) = 7.95 mm | head height (k) = 3 mm | drive = TX25 | thread length (b) = 39 mm | diameter (d) = 5 mm | drive shape = hexalobular | thread type = wood thread. Head shape. Decorative head | Tensile strength = 700 N/mm | Material = V2A 1.4301 AISI 302 | Corrosion resistance class (KWK) = 1-2 at the bottom of the Torx screws for decking boards is a cutting notch.
- Areas of application: the stainless steel V2A oval head screws can be used in all common areas where no road salt (chloride) is used. If the place of use is near maritime v4A grade stainless steel screws should be used to avoid corrosion. The V2A screws have a lower carbon content. Therefore, these screws are slightly softer and cannot be hardened. For hard woods, pre-drilling is therefore necessary.
- From a technical point of view, pre-drilling can be avoided. When it comes to a perfect result, pre-drilled or countersunk before the stainless steel screws are inserted. In too hard wood, the decking boards can tighten screws and the head can tear off. The pre-drilling also prevents splitting of the wooden plank. In addition, there are no unsightly cracks in the area of the plank screws.
- The countersunk wood screws are available in a wide range of sizes. Everyone assembles their personal stainless steel screw set as they need. From a variety of different sized packs, the quantities can be adapted to the respective project. Thanks to the rust-proof Inox brand stainless steel, a high-quality product of industrial quality is always delivered.
In stock
Additional information
| Weight | 0.05 kg |
|---|---|
| Brand | NietFullthings |