on:
Item Type: Bicycle Seatpost
Material: Aluminum Alloy
Color: As Pictures Shown
Product Diameter: Approx. 33.9mm/1.3in
Total Length: Approx. 60cm/23.6in
Load Bearing Limit: 80KG/2821.9oz
Quantity: 1 pc
Installation details
You can insert the plug first and then insert it from there.
Then push the screw through the two holes and tighten the screws in the two lugs
lay the saddle in reverse and put the seat piece in
Then install the tube upside down as shown in the picture, remembering that the lower side is in the front and the higher side is in the back
lock one side screw first and adjust the middle clamp and screw of the seat tube to adjust the Angle
Finally lock the screw
Package List:
1 x Bicycle Seatpost
2 x Screw
4 x Accessory
Note:
1. Manual measurement, please allow 1‑2mm error, thank you!
2. The picture may not reflect the actual color of the project due to the differences between different displays.
3. The seat double bow needs to be reserved for installation with a length of about 5.7 cm/2.2in. If it is shorter than this distance, it cannot be installed.
4. Please install the sitting tube to cross the safety line.