1.5M Curved Surface Shower Threshold Water Barrier, Wet Room Floor Barrier Dam,Shower Tray Sealing Strip,Bathroom Floor Seal Trim,Sink Bathtub Countertop Water Retaining Strip(White,4.5cm H*3cm W)

$45.99

  • How To Install: First clean and dry the surface, measure and cut the shower water stopper to your length, peel off the red adhesive back strip, stick to the Smooth Surface.NOTION:For Long Use, It Is Must To Use Silicone Sealant(Glue) To Fill The Edges Of The Water Barrier And Dry For 24 Hours Until The Sealants Is Solidified(The Package Do Not Contain Silicone Sealant!!!)
  • Curved Surface: The curved groove water dam strip can effectively prevent water splashing or overflowing, and provide you with a safer home environment. The water retaining strip is hollow design, bendable when stepped onit will rebound to its original shape at once.
  • Shower Dam Specification : 3cm W x 4.5cm H. The new collapsible water dam is designed to collapse when it is stepped on or rolled over and then return to its original shape. In this way, while ensuring the safety of the family, it also realizes the separation of wet and dry in the bathroom.
  • Eco-friendly Material: Made of soft rubber, safe and corrosion resistant, high temperature resistant and wear resistant. Easy to clean, only need a wet towel to wipe it.
  • Wet And Dry Separation: It is high enough to withstand the trouble of submerged floor drainand isolate the shower room from the outside world. After installation, water leakage can be avoided and the bathroom can be kept clean. To avoid the troubles caused by humid environment. It can be applied to shower pan, kitchen sink, toilet, and so on.

In stock

— OR  —

— OR  —

  • International Express shipping available
  • 30 day easy returns
Guaranteed Safe Checkout

al:

(1) Please keep the surface clean and dry.

(2) Determine the installation position of water dam and mark it.

(3) Measure the length of the required water dam and cut it to the length you need

(4) Peel off the adhesive and stick to the place. Heat the adhesive by hair dryer for better stickiness when it’s cold.

(5) Seal both edges of the water dam with caulk or glass glue(not included in the package) and clean up excess caulk to leaving a smooth caulk line.

(6) Keep dry for at least 24 hours and the water threshold will work well.

Please note before purchasing:

These waterproof tapes will be rolled up for packaging. When you receive the folded water threshold strip,let it lay freely and the creases will disappear after a few days

Additional information

Weight 0.479 kg
Brand

Zayejod