Not suitable for DC LED strip To open the grey main terminal simply plug/twist a single flat screwdriver between the case and grey cover. Housing material: Plastic / blue. Transformer design in VA: 70. Dimming specifications: Dimmable with trailing-edge (reverse) phase control dimmer. Power: 0-70W Watt, Input: 220V to 240V AC / 50Hz / 60Hz, Output: 11.5V 6A AC, efficiency:> 95% Weight: 100g, Dimensions: Length: 113 mm, Width: 44 mm, height: 28 mm, Color: Blue, Indoor use (IP20), LED and halogen dimmable: recommended is a trailing-edge (reverse) phase control dimmer. If you don’t wish to dim, this LED driver will function as a normal 12V AC power supply if you connect it to a normal switch. Special feature: No minimum load – perfect for 12V LED bulbs (Note: 12V LED Stripes need an DC transformer – this transformer is not suitable for LED Stripes), supply via 230 Volt power source (electrical outlet or light outlet). Individual output for connecting up to 70W / 12V resistive loads (eg halogen lamp) or 70VA / 12V capacitive loads. Important (eg 12V LED lamps with integrated rectifier): The electric load of the transformer depends on the VA values (volt-ampere). If the VA values of the lamps are not known, then only operate LED bulbs with a total of maximum 40W. Recommended termination length at the output 2 meters, otherwise use a shielded power cable. You can find a video of how to open the terminal on YouTube. https://youtu/wn0a27ZrZ60 For opening the terminal simply plug/twist a single flat screwdriver between the case and grey cover.
This transformer is not suitable for DC Voltage LED strip!
12V / AC, 0 – 70W, Transformer, LED driver with No minimum load, No LED flickering and No transformer noise, Dimmable Power Supply
$47.99
- Make sure this fits by entering your model number.
- Not suitable for DC LED strip! Special feature: No minimum load, No transformer noise, No LED flickering
- Our newest No Load Transformer Technology to eliminate transformer noise, No LED flickering and best of all: without minimum load.
- Dimmable, optimal is a power reserve of 20%
- Flicker free LED Driver dimming, If you don’t wish to dim this LED driver will function as a normal 12V AC power supply if you connect it to a normal switch
- 12V / AC (NOTE: This is a alternating current (AC) Transformer). To open the grey terminal/cover simply plug/twist a single flat screwdriver between the case and grey cover. You can find a video how to open the terminal on YouTube: https://youtu/wn0a27ZrZ60
In stock
Additional information
| Weight | 0.1 kg |
|---|---|
| brand | Brand: Isoled |
| dimensions | 11.3 x 4.4 x 2.8 cm; 99.79 Grams |