Are you looking for a replacement for your worn-out and run-down 13 pin trailer plug? Then this is the optimal product for you. Trailer Adapter 13 pin connector standardized according to ISO 11446 Follow the following steps to replace your trailer plug: 1. Remove the old plug. The color of the cables and their respective position is crucial and the new plug should be wired in the same way than the old plug (given that the old plug was wired correctly). 2. Check the old contacts. In case of corrosion, clean the contacts or cut off a small section of the cables to create new contact points. 3. Place the moisture protection (backside sealer, cable protection + sealing ring) on the cable. Then you can plug and screw in the cables into the intended position on the backside of the contact disc. 4. TIP! Fixate the main cable with some hot glue before assembling the remaining plastic parts. Put all components together, screw on the backside sealer and make sure that it sits tight to prohibit moisture intrusion adapter plug can be used for the following trailer types: > Caravans and motor homes > Car trailers of all kinds > Horse trailers, horse transporters > Bicycle trailers > For all 13-PIN sockets standardized according to ISO 11446Scope of delivery: > 1 x 13 pin plug > 1 x cable return clamp > 1 x moisture protection (rear)
Brand:- Your Day Mate
Package Dimensions:- 12.9 x 8.8 x 5.4 cm; 150 g
Manufacturer reference:- XA0325
Manufacturer part number:- XA0325
Item Weight:- 150 g
Date First Available:- 14 May 2020
Brand:- Your Day Mate
Vehicle service type:- Car
Material:- ABS塑料