Our comprehensive 15 piece thread repair set is ideal for restoring damaged threads and is suitable for engine repair and other automotive applicationse are 10 wire inserts , drill bit, thread tap, installation tool and pin breaking tool to match. All inside a tough plastic holding case. Repairing a thread using this kit couldn’t be easier. Begin by choosing a wire insert just a little larger than the thread to be repaired – with the same internal size as the original hole if possible. Now grab the appropriate drill bit and drill the hole deep enough to fully seat the wire insert – plus a little deeper if necessary to allow for the bolt. Then tap a thread into this hole. Each wire insert has a tang at the end – this must be installed facing into the hole. Slip the installation tool through the insert, locate the notch in the tool over the tang, and wind the insert down until it is flush with the top of the hole. With the installation tool removed, the final step is to break away the tang. Grab a punch from the repair kit, place it through the wire insert, and tap lightly with a hammer to break the pin. 10 Piece Wire Thread Inserts 1 Piece Installation Tool 1 Piece Break Pin Tool 1 Piece Twist Drill 1 Piece Hex Key 1 Piece Tap Tool Ideal For Restoring Damaged Threads Complete In Case
Additional information
| Weight | 0.47 kg |
|---|---|
| brand | NEILSEN TOOLS |
| mpn | CT2747 |
| dimensions | 5 x 10 x 15 cm |