2-channel EcoStar RSC2, RSE2 radio receiver 433.92 MHz 12-24 V AC/VDC, COM/N.O

Universal 433.92 MHz rolling code 2-channel receiver that is fully compatible with EcoStar RSC2, RSE2 remotes. The 2 channels of this receive allows you to operate 2 different garage gates and/or other electronics using your original EcoStar RSC2, RSE2 remote. Parameters: 433.92Mhz rolling code frequency2-channel receiverMemory: Up to 400 remotes! Instructions for programming receiver: Learning new remotes–> Press “learn 1” or “learn 2” button – Learn LED will go on. Then press the button which you wish to learn on your remote control. Learn LED will start flashing and go off – This means that you have successfully learned your remote to the receiver. Repeat the above steps for other transmitters. Erasing receivers memory: Press “learn 1” or “learn 2” and keep holding until Learn LED will go off – Once Learn LED is off, it means that you have successfully erased the memory of the appropriate channel. How to connect your receiver: Connect 2 wires of CH1 or CH2 to your control board between: 1) COM and N/O, 2) COM and P/P (push button) in parallel to push button. All you need to do is to connect this receiver to your control board by using only 4 wires (2 – for power; 2 – for relay). Note: The abriviations of your board may be different, so follow your manual. VIDEO INSTRUCTIONS FOR PROGRAMMING RECEIVER:–> https://www.youtube.com/watch?v=LatTu3nG-mA&feature=youtu.be ///We are fully committed for 100% customer satisfaction. If you have any questions about your purchase please contact us.