Installation instructions:
1. Remove the wheel from the vehicle.
2. Lever the tyre from the rim using a tyre lever.
3. Remove the old tube and check the tyre for damage. Find the cause of damage and remove it.
4. Insert the valve from the hose into the valve opening of the rim. Carefully insert the hose into the jacket. Fill the hose a little with air.
5. Pull the tyre on the rim with a lever tool.
6. Inflate the hose slowly. Make sure the rim of the tyre is properly attached to the rim and the tube is not accidentally pinched. If this happens, let the air out and restart.
280 x 65-203 Pushchair Tube 12 Inch with Angle Valve 45 | Pack of 2 | Scooter Tyres Pram Tricycle Balance Bike Trailer
$38.99
- Reliability: Premium rubber made of 1.2 mm butyl rubber that absorbs external shocks on paved roads and can be used for a long time.
- Originality: the diameter and thickness are suitable for replacing two rear tyres of pushchairs: Viper Original, Tutis Pia, Adamex Enduro, Britax Mail Ray, Adbor Zipp.
- Comfort: With the 45 degree bent valve, you can inflate the wheel with any pump located in the house. Forget about the problem of the torn chamber faucet. The optimal air pressure for the wheel is between 1.2 and 1.5 bar.
- Safety, for all seasons. The hose material is lead-free and can also be stored in the household near food. The tube is very wear-resistant and can be used safely in any season and in all weather conditions.
- Replacement process: Inflate the pipe slightly. Insert the tube into the tyre and distribute it evenly across the tyre. Install the valve screw into the wheel. The valve should be on the outside of the pushchair. Mount the outer tyre on one side of the rim and then on the other side. Inflate the wheel up to 1.2 – 1.5 bar. If you have any problems, please contact us at any time. We offer 30 days free return or free exchange.
In stock
Additional information
| Weight | 0.31 kg |
|---|---|
| Brand | AVVS tech |
| EAN | 0765066168919 |
| UPC | 765066168919 |