Installation :
1.Measure:Measure the length and width of the countertop, In the corner, we recommend you cut it to 45 degree, and then connect two part to ensure its firmness;
2.Peel off the film:Avoid repeated sticking and pulling up the sealing strip;Please don’t use your hands to touch the adhesive after tear off the film,which will affect the stickiness;
3.Paste:Apply the water dam gently, keeping it horizontal or vertical, pressing repeated with your fingers.
4.Glue:The most important and necessary step is to fill the edge of the water retention strip with caulk to ensure a long-lasting and strong adhesion.
Cautions: In order to achieve the best effect , Please pay attention to the follow question!!!
1.Purchase a size that is 5cm-10cm longer than the required length ;
2.In the cold season,it is suggested to use a hairdryer to heat the adhesive strips for better sticking effect during installation;
3.Clean the surface and dry it before installation!
4.This floor seal suit for all kinds of Smooth Flat floor, such as smooth marble floor, coating floor and other smooth surface.Not suit for severe sags and crests floor, big gap floor and mosaic glass floor;
5.Please make a mark in advance to avoid repeated sticking, which will affect the stickiness;
6.Use with silicone sealant,after completing,remove the excess glue to make the edge smooth;
7.After the installation is completed, it needs to be kept dry for 24 hours, and it needs to be postponed for 1-2 days in cold season.