Material: metal
Installation and Introduction:
1. Install a 35mm hole opener, adjust the drilling depth to 10-15MM, and then lock the limit ring.
2. Adjust the fixed size of the fast clip black pressing block (Note: the size of the tool adjustable fixed board is 15-25mm).
3. Move the puncher to the marking and drilling position of the board, and lock the quick clamp.
4. Tighten the handle of the drill, press down the hole to the depth of 10-15MM, and then drill 2mm screw holes on the left and right sides.
Package Include:
1 x hinge drilling locator
1 x 35mm hole saw drill bit
1 x top linkage bearing
1 x depth positioning ring
2 x wrenches
1 x 2mm drill bit
1 x allen key