Specifications:
Type: MKS GEN L V1.0 Controller Board
Application: 3D Printer
Package Weight: About 130g
Package List:
1 * MKS Gen-L V1.0
1 * 53cm USB Cable
(Not including other items.)
Note:
Please do not connect positive and negative electrode reversely. Please do not plug/unplug or adjust the current of the stepper motor drive while it is working.
3D Printer MKS Gen-L V1.0 Controller Board, MKS Integrated Mainboard Motherboard Compatible with Ramps1.4, Supports TMC2100 A4988 8825 Driver, LCD2004 LCD12864 TFT28 TFT32
$50.99
- Make sure this fits by entering your model number.
- 【Advantage-1】Use specific power chip, support 12V-24V power input, and resolve the problems of chip heating and power shortage. Use high-quality MOSFET, better cooling effect and more stable.
- 【Advantage-2】Run Marlin firmware, the configuration is completely same as Ramps 1.4, and available to directly replace the Ramps 1.4. Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32.
- 【Advantage-3】Plug the stepper drivers according to the different color terminals which decreases the probability of reverse and prevents the controller board damage.
- 【Advantage-4】2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Reserve external driver signal, available to connect external high-current driver to drive the 57 and 86 stepper motors. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like.
- 【Advantage-5】Use CH340 serial port chip, more easily install the drive than 16U2. Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Support 24V input, the heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats.
In stock
Additional information
| Weight | 0.13 kg |
|---|---|
| brand | Diyeeni |
| dimensions | 11 x 8.5 x 2 cm; 130 Grams |