3mirrors Tungsten Electrode Sharpener Grinder Angle Controller TIG WIG Welding Tool Grinding for 040 1/16 5/64 3/32 1/8 5/32 each 4 tips 30° 36° 45° 60° (The problem of the 2 sets of hole direction and hole spacing has been improved)
INSTALLATION STEPS :
1: Put on the 2 O-rings to the aluminum main body to ensure the Dust cover can be fixed and prevent dust leakage;
2. Install the mandrel to a Diamond wheel;
3. Screw the aluminum main body on Rotary Tool , You can choose Dremel;
4. Set the grinding wheel and mandrel in the collet of your rotary tool;
5. Adjust the height of the Diamond wheel, Make sure the grinding wheel is parallel to the edge of the control head;
6. Push the transparent Dust cover on the control head;
7. If the dust cover is too tight to push, You could apply some oil (Whatever Engine oil, grease or Dishwashing liquid) on the O-ring so the cover will be easy to install;
8. Start grinding different angles tungsten needle, according to your needs;
9. After grinding, Centralized processing the tungsten power, avoid trouble, convenient and healthy.