3V 3/8 Geodesic Dome Connector Set of 46 Connectors Metal Galvanised Steel Dome Frequency 3 Greenhouse Workshop Garden Shed Chicken House Mosquito Net

DOMESTAR: 46 galvanized steel connectors for geodesic dome 3V 3/8 (frequency 3)

Package includes:
– 15 x 4-pin connectors
– 6 x 5-pin connectors
– 25 x 6-pin connectors
– assembly instructions and links to assembly video

Technical features:
Material: galvanized steel, 2.8 mm thick
Connector diameter: 19.5 cm
A, B and C marking of all connector branches

In addition to connectors you will need:
120 wooden uprights/panels/rafters. You will have access to my calculator to determine the length of the amounts. There are only 3 different lengths.
The length of the uprights will determine the diameter and height of the dome.
240 TRCC bolts (round head square neck) 1 or 2 cm larger than the height of the uprights.

You will need the following tools:
– a saw (normal or jig, circular or radial) to cut the lambourdes to the right size
– a drill for holes in the paneling
– a hammer to drive the bolts
– a wrench for screwing nuts (better: an electric screwdriver)
– a ladder or a stepladder

The purchase of this kit includes a detailed online instruction manual, installation videos and tutorials and access to our assembly support service. I do everything to make the assembly as easy as possible.

2 PEOPLE REQUIRED FOR ASSEMBLY
Note that it really takes 2 to mount a 3V geodesic dome (our connectors for 1V and 2V domes can be mounted alone) as some steps require supporting the lower stage.

Note also that a 3V dome disassembly without support of the lower stages will bend the connectors which will then no longer be usable. Dismantling is therefore reserved for experienced people.