Specification:
Item Type: 4 in 1 Scrapbook Envelope Board
Material: Abs, Metal
Usage: Used to Make Gift Boxes, Envelopes, Bows,Cut Rounded Corners, Etc.
Length:Approx. 35cm / 13.8in
Width: Approx. 19cm / 7.5in
Instructions for making gift boxes: (use one sheet of paper at a time)
1. Select the size of the gift box and prepare the corresponding paper size.
2. Align the left edge of the paper with the corresponding START positioning line.
3. Draw the corresponding HORIZONTAL &VERTICAL and DIAGONAL indentation lines with indentation strokes.
4. Press the blue button to cut the chamfer.
5. Turn the paper counterclockwise by 90 degree, put it in, and repeat steps 3 and 4 to scratch all edges to overwhelm the corners.
6. Turn the paper upside down, align the edges of the four sides according to step 2, and put it in. Press the blue button to make a chamfer notch.
7. Put the four corners of the paper into B to cut the rounded hooks.
8. Fold along the scratch.
9. Make the scratch line clearer.
10. Fold the diagonal inward.
11. Connect two diagonal hooks respectively.
12. The gift box is finished.
Instructions for making envelopes:
1. Select the content stationery size.
2. Prepare envelope paper of corresponding size.
3. Align the left edge of the paper with the scale corresponding to SCORE.
4. Press the scratch along the HORIZONTAL line with a scratch pen.
5. Press the blue button to cut the chamfer.
6. Rotate the paper by 90 degree, align the pressed scratch line with the panel VERTICAL line and put it in.
7. Press the scratch again along the HORIZONTAL line with a scratch pen.
8. Repeat the above steps 4_x001e_7 to press scratches and cut chamfers on the four sides respectively.
9. Put the four corners of the paper into