all:
1. Remove the wheel from the vehicle.
2. Pry the tyre off the rim with a tyre lever.
3. Remove the old tube and check the tyre for damage. Find the cause of damage and remove it.
4. Insert the valve from the hose into the valve opening of the rim. Carefully insert the hose into the coat. Fill the hose a little with air.
5. Pull the tyre onto the rim with a pry tool.
6. Inflate the hose slowly. Make sure the rim of the tyre on the rim is correctly and the tube is not accidentally trapped. If this happens, let the air out and reboot.
48 x 188 Inner Tube Pushchair 10 Inch with Angle Valve 45 Including 2 Mounting Levers | Pack of 2 | for Tyres Pushchair 10 Inch 48 x 188 cm
AUD $72.99
- Reliability: Premium rubber made of 1.2mm butyl rubber that absorbs external shocks on paved roads and can be used for a long time.
- ORIGINALITY. Diameter and thickness of the hose fit exactly to replace the two front tyres of the Anex Cross stroller and are suitable for other pushchairs with a tyre size of 48 x 188 mm.
- Comfort: With the valve bent to 45 degrees, you can inflate the wheel with any pump in the house. Forget about the problem of torn off chamber fitting. The optimal air pressure for the wheel is between 1.2 and 1.5 bar.
- Safety, for all seasons. The hose material is lead-free and can also be stored near food in the home. The tube is very wear-resistant and can be used safely in any season and in all weather conditions.
- Replacement method: Inflate the pipe easily. Insert the tube into the tyre and distribute it evenly throughout the tyre. Install the valve fitting into the wheel. The valve should be on the outside of the pushchair. Install the outer tyre on one side of the rim and then on the other side. Inflate the wheel up to 1.2 – 1.5 bar. If you have any problems, please feel free to contact us We offer 30 days free return or free exchange.
In stock
Additional information
| Weight | 0.25 kg |
|---|---|
| Brand | AVVS tech |
| EAN | 0765066168773 |
| UPC | 765066168773 |