5Pcs Ultrasonic Module Distance Sensor, Ultrasonic Proximity Sensors Ultrasonic Ranging Module HC-SR04 Distance Measuring Sensor Measuring Module Transducer for Arduino

$28.99

  • Detection distance: This ultrasonic module distance sensor can detect the distance of 2cm-45cm, measurement accuracy is 0.3cm,super-close blind spot (2cm), the sensing angle of the ranging sensor is ≤15°.
  • Support for: The ultrasonic ranging module can support VCC, trig (control end), echo (receiving end), out (empty), and GND wiring.
  • Compatible with: Our distance measuring sensor fully compatible with the GH-311 anti-theft module.
  • Main Parameters: Working voltage of the module: DC5V, quiescent current: <2mA, level output: high 5V, low 0V. Low power consumption and fast propagation.
  • High-Precision Ranging: This ultrasonic proximity sensors uses the principle of ultrasonic ranging, the measurement is accurate.

In stock

— OR  —

— OR  —

  • International Express shipping available
  • 30 day easy returns
Guaranteed Safe Checkout

Specification:
Operating Voltage: DC5V
Static Current: <2mA
Level Output: High 5V, Low 0V
Sensing Angle: ≤15°
Detecting Distance: 2cm-450cm
Accuracy: 0.3cm
Wiring: VCC, trig(control terminal), echo(reception terminal), out(empty), GND
 
Module Working Principle:
1. Adopt IO trigger through supplying at least 10us sequence of high  level signal.
2. The module automatically send eight 40khz square waves and  automatically detect whether receive the returning pulse signal.
3. If there is signals returning, output high level through IO, the  continuance time of high level is the time of that from the ultrasonic  transmitting to receiving. Measuring distance = (high level time * sound  velocity (340M/S) / 2.
 
Package list:
5 x Ultrasonic Ranging Module
 
Note: 
1. The module should be inserted in the circuit before power-on, which avoid producing high level of misoperation; If not, then power again.
2. The TRIP pin is an internal pull-up 10K resistor. Pull down the TRIP pin by the IO port of the microcontroller and give a pulse signal of 10us or more.
3. The OUT pin is the switch output pin when the module is used as the anti-theft module. The distance measuring module does not need this pin!

Additional information

Weight 0.044 kg
brand

Agatige

dimensions

‎1 x 1 x 1 cm; 40 Grams