5PIN 12MM L Shape 2 Pin Right Angle Corner Solderless Connectors 2Pin 10mm LED Light Connector L Connectors for SMD 3825(2p-10)

Feature: These L shape connectors for Single Colour 3528/2835 LED light strips comes with 2 easy-clasp connectors and a 90 degree L shape PCB board. You can attach it with your light strips directly without any tools or wielding operations. The wireless design ensures seamless layout when you need to spread your light strips around sharp corners. Compatible with both non-waterproof and waterproof 10mm 2 pin Single Colour LED light strips. Installation tips: Open the cap on the connector and slide in the led strip. Make sure the poles match correctly, then clasp the cap. For waterproof light strips, you need to peel off the silicone around the soldering line first. Important note:If the LEDs flicker or do not light up, it is because there is poor contact between the connector and the LED strip. To solve the problem, please follow these steps: 01r on your LED strip. 02 all the caps of the connector. 03rt your LED strip into the connector, slightly pull and push your LED strip to adjust the contact points between the 2 copper contacts on your LED strip and the 2 prongs in the connector. If the LEDs still do not light up, please use your finger to press a little hard on the 2 prongs in the connector. 04 the LEDs still do not light up, please adjust the contact points between the 2 copper contacts on the L-shape PCB board and the 2 prongs in the connector, until you see the LEDs light up. Then you can close all the caps of the connector.