1 x 6 Way Consumer Unit, comes pre-assembled with a 63 Amp 30mA RCD safety switch and 6 x Type B Circuit Breakers, 2 x 6 Amps (Ideal for Lighting Circuits), 2 x 16 Amps (Ideal for heaters, appliances, or dedicated switches / sockets) and 2 x 32 Amps (Ring mains, ideal for wall sockets). This unit is assembled by A1electrics in our warehouse in the UK, we assemble the unit with a busbar and a neutral link. *** This consumer unit is made from plastic – In the UK, regulations mean that it can not be installed inside the home or in a building attached to the home / domestic dwellings. If you have an electrician lined up to install the unit, please get in touch with the electrician first before purchasing, as some electricians now refuse to work with plastic units. *** This unit can still be installed in a detached garage, shed, outbuildings and any other building not attached to the home / domestic dwelling. This unit is IP65 rated so it can be installed in buildings prone to condensation etc, it can also be installed outside, installer must ensure they properly seal any holes they make for cable entry. The unit does not come with any guides for cable entry, the sides are plain all around, the installer has to make their own cable entry hole using a holesaw and should seal the hole with a suitable waterproof gland. This unit comes with an easy open hinged inspection door, the door is tinted but is see-through enough to check mcbs without opening the door. The dimensions of this unit are 210mm Tall x 215mm Wide x 105mm Deep. Front cover is held to the base with screws, to access the screws behind the door hinge, you push the door all the way back and it will snap off the hinge. Wiring and installation instructions are not supplied with the unit
6 Way Consumer Unit 63 Amp RCD and 6x MCB Circuit Breakers 6A 16A 32A Type B IP65 Weatherproof Outdoor Outbuilding Garage Shed
$149.99
- Plastic IP65 6 Way Consumer Unit, pre-assembled with 63 Amp 30mA RCD Trip switch and 6 x Type B Circuit Breakers for Domestic Use
- The 6 x MCB Ratings are 2 x 6 Amp (Ideal for standard lighting circuits) 2 x 16 Amp (Ideal for heaters, appliances, or dedicated switches and socket circuits), 2 x 32 Amp (Ring mains, ideal for wall sockets and tools such as welders etc)
- 63 Amp 30mA RCD Switch – An RCD will switch off the entire consumer unit if a fault is detected, potentially saving lives by preventing electrocution or fire caused by earth faults
- This unit has no knockouts or guides, the sides are plain and the installer should drill thier own cable entry holes, preferably using a holesaw, the cable entry hole should then be sealed with a suitable waterproof cable gland to keep the IP rating intact
- Unit Dimensions: 215mm Tall x 210mm Wide x 105mm Deep
- The unit is assembled in the UK by A1electrics, we ensure everything is tightened to the correct torque settings and all elements are compliant with British Standards and CE
- Busbar is installed, a suitable rated busbar is cut specifically for this unit, the basbar is insulated and the ends capped so there is no bare metal
In stock
Additional information
| Weight | 1.81 kg |
|---|---|
| brand | A1 ELECTRICS A1ELECTRICS.COM |
| dimensions | |