Setup Description:
1. Press the menu key in the main interface, select the interface to adjust the corresponding parameters and set the working state of the equipment.
2. Working mode of load, COT manual mode load output, AUTO automatic light control mode. 00: 58 Set the output time after no sunlight.
3. Set the real-time working status: D 13.1 V the battery voltage value display, D 29.1 ℃ temperature display, D2.1A solar charging current display, large current charging arrow flows fast, and vice versa. The d0.0a output load current dispaly, the large current discharge arrow flows fast and vice versa.
Note:
Make sure the battery has enough voltage so that the controller can identify the battery before the first installation.
The solar controller is only suitable for lead-acid batteries, such as open type, AGM, gel, etc.
Not suitable for Ni – MH batteries, Li – ion batteries or other batteries.
Packing List:
1 *Solar charging controller
1 *Manual
60A Auto Solar Charge Controller MPPT With Dual USB 5V Output 12/24V Solar Panel Battery Regulator Charge
$107.99
- MPPT solar charge controller MPPT10-60: Compared with normal solar charge controller, this MPPT controller could increase efficiency by 10%-30%.
- When the battery voltage is low, the controller will automatically cut off the load from the system. If the voltage of battery is back to normal and the load will restart working.
- This MPPT controller has perfect SOC function, control charge current, and supply power to the loads.
- Prevent the battery from over-charging , over-discharging and reverse charging to solar panels during nights.
- This controller can charge and discharge at the same time.
In stock
Additional information
| Weight | 0.28 kg |
|---|---|
| brand | Fuhuihe |