Instruction:
8K@60HZ HDMI Switch 3 in 1 out will take any HDMI signal and duplicate the signal, sending the same high definition signal to displays simultaneously.
Features:
HDMI mirroring switch,No expansion function.
Supports resolutions: 8K@60Hz, 4K@120Hz, 1080P@240Hz and below. 3D devices
Provide stransmission rate of up to 48Gbps.
Push button switching, no automatic recognition switching.
Specification:
– Product Type:3X1 HDMI Switch
– Material:Plastic
– Power Supply: Input Devices
– Dimension (L x W x H):0.71X0.41X0.03inch
– Weight: 96g
Trouble Shooting Guide:
Q: No auto switch or no signal on the output device when there’s only 1 HDMI signal source.
A: For some devices, the HDMI switch may not work when only one input device is power on due to insufficient power. In this case, please turn on two or all the three source devices to try.
Q: The picture in not clear on the HDMI displayer.
A: Please use standard HDMI2.1cable(19+2) AWG26 and not exceed 1.5m(5ft)
Q: There are picture and sound interference on the HDMI displayer.
A: First please make sure the connection are correct. And then check if there is any source interfere near this HDMI switch and the cables used to connect between sources(such as the power cable). You can also adjust (lower) the resolution of the input devices to enhance data transmit efficiency.
Q: The picture is ok but sound drops out.
A: Please turn on the HDMI audio output on the input HDMI device.
Q: Only got sound on the displayer.
A: Could be because compatibility issue, try lower the resolution of HDMI input sources.
Include:
1*8K HDMI 2.1 Switch 3 in 1 out
1*User Manual