The spot welder control module is developed for DIY or simple battery welder. Mainly used for welding nickel-plated single cells or battery packs. The module includes a main board and display board, optional 40A and 100A bidirectional thyristor, excluding welding transformers, welding pens and other tools.
Specification:
Supply voltage: 9-12VAC
Bidirectional thyristor: 40A, 100A (Optional)
Package weight: Approx. 10g
How to use:
1. Voltage Calibration
Voltage calibration must be performed at the first time. Calibration is no longer required as long as power transformer of the module is not replaced. Of course, if the voltage is not correct, you can also calibrate it.
Calibration operation: press the encoder knob, then supply power to the module, enter the calibration interface. The first option can adjust the flashing value, adjust with the short encoder, after three adjustments, short press the encoder to enter the operation interface. For example, the measuring voltage is 220V, then the calibration interface can be adjusted to 220.
2. Display Interface
Digital adjustment: Short press the encoder knob until the corresponding value flashes, short press the encoder to enter the work interface. In work interface, when the calculated value is greater than 0, press the encoder for about 3 seconds to clear the value.
Package list:
1 * Main Board
1 * Display Board
1 * Ribbon Cable
9-12VAC Digital Display Spot Welder Time Control Module 40A/100A DIY Spot Welder Time Controller for Welding Battery Packs(40A)
$63.99
- 【Product Characterization】: This 9-12V digital display spot welder control module is developed for DIY or simple battery welder, which is mainly used for welding nickel-plated single cells or battery packs
- 【Fast Triggering】: Our DIY spot welder time controller supports 9-12V AC power input, which needs to use AC transformer. The power input and external triggering is convenient and fast, no need to solder terminals
- 【0-999 Welding Count Function】: The number of weldings is clear at a glance. You can press and hold the encoder for 3 seconds to clear the count bit. You can save the last operation, monopulse triggers this module. And time input 0-99 cycle (1 cycle is 20ms), adjustable welding strength 30%-99%
- 【Module Included】: Our monopulse spot welder time controller module includes a main board and display board, optional 40A and 100A bidirectional thyristor, excluding welding transformers, welding pens and other tools
- 【Voltage Compensation】: According to the local voltage change, this spot welder control module can automatically adjust the compensation output, and displays local voltage and compensation value for about 1 second while triggering
In stock
Additional information
| Weight | 0.064 kg |
|---|---|
| brand | Oumefar |
| dimensions | 1 x 1 x 1 cm; 10 Grams |