Adept Technology Programmable Thermostat White

Programmable Thermostat that is ultra compact and provides precise control and is easily configured to control the temperature and timings for most Heating systems, including Electric or Wet Underfloor Heating Systems. Full Specification Digital programmable room thermostat for heating systems 1 built-in sensor 1 remote sensor Can be set so that sensing is floor only, air only or air + floor. Features 2-pole safety power switch, On/off control output for heating device The room thermostat with built-in 10K NTC sensor, also have external floor sensor, three control mode available Shut down output when heating over limitation for protecting the wooden floor 7-days Programmable or non-programmable available up to 6 heating periods per day. Keep user setting during power loss Technical data Voltage: AC100- 240V 50/60Hz Power Consumption: 2W Power load: 16A* Limitation range: 0°c~90°c Switching differential: ±1°c Ambient temperature: -5~50°c Protective housing: IP20 Housing material: Anti-flammable PC Floor sensor: Thermoplastic 10K NTC sensor, cable length is 3m Dimension: 86mm X 86mm X16mm flush mount Cerification: CE * – The thermostat is rated at 16Amp but to ensure you get maximum life from the thermostat, we recommend that you use loads that do not exceed 12.8 Amps. The relay within the thermostat is rated in accordance with the eequirements of EN 61810-1:2004 and EN60730-1 which are not representative of ‘real life’ applications but an arbitrary test method. The lifecycle of the relay contacts within the thermostat are affected by the power loading the load does not exceed 12.8Amps then the contact life is extended by more than double when compared with loads of 16 Amp.