This is a water retention system for any place water control is a problem， angled shower panbase or barrier free, roll-in ，zero transition showers
where water splashes here and there. Environmentally friendly silicone material，soft for protection，easy to install for professionals or housewife，
our waterproof shower threshold would do a good job in preventing costly floor damage from spillovers. Ideal as a shower
water dam barrier，water guard，water stopper，splash guard, it would be your first and perfect choice.
Installation steps and attentions：
(1) Please completely clean the surface and allow to dry. That is very important.
(2) Determine the position of the water retaining strip and mark it with a pen on the ground.
(3) Cut the water dam to length with a hacksaw.
(4) Peel off the pre-applied adhesive tape and put in place. Heat the gum by hair dryer for better stickiness when it’s cold.
(5) Caulk any edge seals and clean up excess silicone leaving a smooth caulk line.
(6) Allow to dry and no contact with water in at least 24 hours.
Adoture Collapsible Shower Threshold Water Dam Shower Barrier and Retention System and Keeps Water Inside Threshold…
$45.99
- ✅Note: Clean the surface thoroughly and let it dry. This is very important. Dry for at least 24 hours without contact with water.
- ✅The long, flexible design creates all sorts of shapes.
- ✅Shower barrier and retention system keeps water inside the threshold.
- ✅Ideal for curbless showers and other areas where water needs to be contained.
- ✅The dam size: 66” L x 1.18″ W x 1.97” H. It can be easily cut to the length you need.
In stock
Additional information
| Weight | 0.73 kg |
|---|---|
| brand | Adoture |
| dimensions | 33.5 x 20 x 5.3 cm; 720 Grams |