Adoture Collapsible Shower Water Guard Shower Splash Guard Water Dam Retention DIY System Bathtub Splash Guard, Keeps Water Inside Threshold (2 M, L Type White)

Adoture shower barrier——A wet room floor barrier to keep water inside the threshold, achieve dry and wet separation in your kitchen/bathroom. Suitable for kitchen, bathroom, washing table, table top and other areas where water needs to be contained. About shower water barrier: – Safety Material: soft, environmentally friendly silicone material. – Eeasy to clean. – Multiple Styles and Size: Large size. Recommended for bathroom,shower enclosures * Classic Style: 3cm/1.18” W x 4.6cm/1.81” H * Wave Style: 3cm/1.18” W x 4.5cm/1.77” H * Magnetic Style: 1.5cm/0.59” W x 2cm/0.78” H Small size. Recommended for use on the washing table, table top * T type: 1.5cm/0.59” W x 3cm/1.18” H * L type: 2cm/0.78” W x 1.2cm/0.47” H * Stick Type: 3.4cm/1.34” W x 4.7cm/1.85” HIf you have any questions or need longer length, please feel free to consult Adoture. – Support DIY: Bendable shower barrier. Supports to cut the length and installation arc of the shower barrier freely. – Installation steps and attentions: Each shower tray sealing strip comes with installation instructions by Adoture. Please check the installation tutorial and installation video. Classic Style/ Wave Style/ T type/Stick Type Shower Water Barrier:It is recommended to install in a straight line or with a curved arc greater than 90 degrees during installation to ensure water blocking effect better. L Type Shower Water Barrier:It is recommended to install only in a straight line, can not be bent. Please cut the water retaining tape at the corner at 45 degree angle and then connect it. – Removal of marks: It may leave marks if you need to remove the shower water barrier. You can use alcohol to clean the remaining glue, or scrape it with a knife to remove it gently.