Agatige Receiver, Wireless DMX512 2.4G ISM Wireless Transceiver Module Board Led Controller Transmitter

Specifications:
Size: 7*1.8*1.7cm/2.76*0.71*0.67inch
Input Voltage: DC 5V 500mA Min
Operating frequency section: 2.4G ISM, 126 Channel Frequency section
Receiver sensitivity: -94dBm
Signal port: 3-pin female plug
Communication distance: 400m/1312.34ft (visible distance)
Signal port: RS485 or CPU series port AURT
Application: Upgrade DMX512 Stage Lights
Package list:
1 x DMX512 Receiver&Transmitter Kit
Note:
ID code and LED color are associated:
1: RED
2: GREEN
3: RED+GREEN = YELLOW
4: BLUE
5: RED+BLUE = PURPLE
6: GREEN+BLUE = CYAN
7: RED+GREEN+BLUE = WHITE
Press the button once to indicate the ID setting, press the button again to set the ID, then press the ID button to add 1 each time.
Working conditions:
The LED is constantly lit: no DMX or wireless signal.
Green LED flashes: Receive
RF – 2. 400-2. 525 G, a total of 126 channels, automatic search.
ID code – 1-7 group ID code, press button to set, can only work under the same ID code of the transmitter and receiver.
Establish connection:
Turn on the power of the DMX512 wireless receiver and transmission board.
Press the button to set the same ID value of the transmitting board and the receiving board. If you need to use more than one group of wireless networks at the same place, use different ID values.
When the transmitter transmits DMX data in the no-interference frequency portion, the red LED flashes and the receiver changes the communication frequency portion. The green LED flashes until the same ID value is corrected, and once the DMX data is faster, the LED flashes faster.
Then the connection is established correctly.