When the keyboard is installed, it will be found that it is too tight. You can use a hair dryer to blow hot air against the cross section of the keycap. After the holder is softened, adjust it. If it is too loose, you can use a toothpick to apply a trace of glue to the transverse hole to reduce the gap and increase friction.
Specifications:
Type: epoxy mould.
Material : silicone
Colour : as shown in the picture
Size:
Strap width: 22 – 35 mm; length: 35 – 65 mm.
Lock key 35mm Length 68mm
Spacebar width: 41 – 45 mm; length: 145 – 150 mm.
Ctrl Width: 23-43mm; Length: 65-68mm
Back button width: 23 – 43 mm; length: 23 – 68 mm.
Cat paw: 70 x 53 mm
Package includes:
1 keycaps silicone moulds.
Hot tips:
As the size is measured by hand, there is a small error, please understand.
Due to the difference between light and display, the colour of the product may be slightly different from the actual situation.