In the backlight brightness to meet the requirements under the conditions, lower operating voltage, can significantly prolong life. Need to use current limiting resistor in series 100Ω to 200Ω, reduce the impact on the filament bootSpecifications: Voltage 500MV Header DC resistance: 652Ω Operating voltage: 6 ~ 12V AC or DC Material: Plastic + metal Driver board: 6.8cm x 5.5cm/2.67 x 2.16inch VU meter: 3.4cm x 3.4cm/1.33 x 1.33inch Weight: 90g Packing Include: 2 x 500μA VU Meter 1 x AC12V driver
Akozon VU Meter, 2 Pcs VU Panel Meter Warm Back Light Recording + Audio Level Amp with Driver Board
$82.99
- Make sure this fits by entering your model number.
- 【Installation Size】: The design of bridge pile rectifier filter circuit, can be a transformer or DC power supply, power supply voltage 12-15V / 300mA. Installation dimensions: the outer frame is 67.4MM * 56MM, screw hole installation size: 57MM * 50.5MM, Screws suitable for M3 screws
- 【Adjustable】: The level swings adjustable, can be compatible with all the different types of table header, two blue 500-ohm potentiometers on the board can adjust the sensitivity of the two headers separately, turn clockwise to increase sensitivity
- 【Durable Use】: The drive signal source can be connected to the amplifier input or audio amplifier output, without changing original circuitry. The luminous effect is brighter and more uniform, which is conducive to prolonging the service life, the recommended working voltage is 10V
- 【Two Power Supply】: Support two level meter backlight power supply, change the current limiting resistor can be connected to different backlight, operating voltage: 6-12V AC or DC
- 【Two Output】: The driver board supports two output connection terminals, The backlight is an incandescent light bulb, The middle two lugs are for measurement, the plus on the right is positive, the left is negative, and the outer two shorter lugs are backlit
In stock