Feature:
How to Use:
How to use the motor:
1. After fixing the motor, link the battery assembly to the Electronic Speed Controller (ESC).
2. Connect the corresponding colors of the three wires of the motor to the governor. If the steering is not correct, just replace any two wires.
3. Connect the receiver, receiving the third channel (CH3) to the electronic governor, and start the test.
How to use the ESC:
1. Connect the BEC cable to the receiver
2. Connect the motor leads to the ESC
3. Turn on the transmitter
4. Connect the battery pack to the ESC, then turn on the ESC.
5. After the connection between the motor and the battery is completed, the motor emits a beep beep sound.
6. When the throttle stick is in the neutral position, the motor makes a beep beep sound again.
7. The ESC is normal.
Specification:
Item Type: RC Brushless ESC
Material: Copper, plastic,aluminum alloy
Color: Black
Model: 3650
KV (RPM/Volt): 5200kv
Wattage: 900W
Maximum Speed: 50000
Maximum Voltage: <9.6V
Maximum Ampere: 94A
IO: 3.7A
Resistance: 0.0051
Number of Rotor Poles: 4
Motor Diameter: Approx. 36mm / 1.4in
Motor Length: Approx. 50mm / 2in (without shaft)
Motor Shaft Length: Approx. 15mm / 0.6in
Shaft Diameter: Approx. 3.17mm / 0.12in
Connector: 4.0mm banana plug
60A ESC:
Continuous Current: 60A
Maximum Current: 320A
Resistance: 0.0007ohm
Battery: 2-3S cells Lipo
Motor Support: Sensorless brushless
BEC Output: 5.8V / 3A (switch mode)
Product Size: Approx. 50 x 36 x 31mm / 2 x 1.4 x 1.2in (without wire)
Application: Suitable for 1/10 1/12 1/16 RC flat sports car or racing car
Package List:
1 x 3650 Brushless Motor
1 x 60A ESC
1 x Instruction