Product Information
The new Eiszapfen PRO hard tube fittings from Alphacool are the next step in development for the familiar Eiszapfen fittings. In the development of the fittings Alphacool concentrated on a specific problem, deforming PETG hard tubes at high temperatures. PETG can start to deform at 60°C. Although such a temperature is usually rarely reached, it can still occur. The Eiszapfen PRO fittings prevent this problem from the outset and hold the tubes in position.
The deformation is prevented by the new nylon inserts inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which provides a better grip. With the insert and the compression seal, the tube is strengthened from the inside and outside.
Even under heavy loads the HardTube does not slip. Alphacool has tested the tensile strength of up to over 8kg, so there is no need to worry about loose tubing.
Technical details:Material: brassColour: chromeDiameter: 22 mmHeight: 20 mmThread: G1/4″Thread length: 5 mmHardTube size: 13 mmCompatibility: PETG, acrylic, brass and glass tubesWeight: 0,023 kgScope of supply: 1x Alphacool Eiszapfen PRO 13mm HardTube Fitting G1/4 – Chrome
Alphacool Eiszapfen PRO 13mm HardTube Fitting G1/4 – Chrome
$38.99
- Make sure this fits by entering your model number.
- The new icicles PRO HardTube fittings from Alphacool are a further development of the well-known icicles. In the development of fittings, Alphacool focused specifically on a specific problem: the deformation of PETG HardTubes at high temperature. These can deform at 60°C.
- Although such a temperature is usually rarely reached, it can still be achieved. The Icicles PRO prevent this problem from beginning and keep the tubes in place.
- Deformation is prevented by the new nylon inserts inside and stabilises the hard tubes. Furthermore, the fitting, still has an O-ring and a compression seal. However, the contact surface is much larger than normal O-rings which provides a better grip.
- Thanks to the insert and the compression seal in the screw connection, the tube is reinforced from the inside and out.
- Technical details: material: brass. Colour: chrome. Diameter: 22 mm. Height: 20 mm. Thread: G1/4 inches. Thread length: 5 mm. Hardtube. Size: 13 mm. Compatibility: PETG, acrylic, brass and glass tubes. Weight: 0.023 kg. Box contents: 1x Alphacool Icicle PRO 13 mm hardtube fitting G1/4 – chrome.
In stock
Additional information
| Weight | 0.03 kg |
|---|---|
| brand | Alphacool |
| dimensions |