Product description
Aqua Quality AQ100 Water Filter Compatible with InSinkErator F-701R. This filter is fully interchangeable with the InSinkErator F-701R & F-201R Water Filter and will fit both A1 or A3 filter heads. This filter has the same specification as the F-701R sold by InSinkErator making it much more economical solution. About this filter; Removes chlorine up to 98% – dramatically improves the taste of drinking water for better tasting and aromatic beverages. Reduces particulates (sediment, rust etc.), turbidity and other unwanted tastes and odours. Built-in Scale Inhibitor – Reduces limescale and water hardness causing minerals (calcium & magnesium) via polyphosphate media to protect your equipment. The Aqua Quality AQ100 Water Filter is compatible with any of the below systems using the “Neo Tank” with an A1 or A3 Head. It is also compatible with InSinkErator F201R.
Legal Disclaimer
Warnings: DO NOT install where water hammer conditions may occur. If water hammer conditions do exist you MUST install a water hammer arrester. DO NOT install if water pressure exceeds 120 psi. If water pressure exceeds 80 psi (552 kPa), you MUST install a pressure limiting valve. DO NOT install on a hot water supply. DO NOT install filters in systems where ambient temperatures may go above 100°F or below 40°F. Protect from freezing by removing filter cartridge where temperatures drops below 40°F. Where a backflow prevention device has been installed on a water system, a device for controlling pressure due to thermal expansion must also be installed.