on:
Item Type; Marine Bilge Pump Sensor
Material: ABS
Operating Voltage: DC12V/24V
Maximum Current: 12V/20A, 24V/10A
Size: 16AWG/1000MM
Maximum Operating Temperature: 60℃
Maximum Flash Temperature: 90℃
Fitment: Ship, Yacht
How to Use:
Wiring:
The manual terminal is directly connected to the brown (+) water pump cable and the black (signal output) cable of the electronic water level switch.
Automatic terminal on electronic water level switch brown (+) bar
The black (‑) pump wire is connected to the negative battery terminal
packing list:
1 x Marine Bilge Pump Sensor
1 x Instruction
Notice:
1. Before installation, ensure that the power supply is off and the waste water system is empty.
2. Not applicable to flammable liquids, diesel, chemicals, etc.
3. Apply to fresh water or bilge water only.
4. Connect the series fuse (Note: Install the appropriate amperage specified for your pump node).
5. The correct voltage range is 10.5v d.c to 28.8V d.c. Do not use any other voltage, or use AC or AC to DC conversion power.
6. The electric field sensor can absorb up to 20 amps of current.