Arducam just released this High Quality camera module for Jetson Nano/Xavier NX. You can use this camera module on Jetson Nano/Xavier NX natively with ISP features. No hardware modifications required, just install the driver and you are good to goIFICATIONS– Sensor: IMX477 – Optical Format: 1/2.3″ (diagonal 7.857mm) – Resolution: 4056(H) x 3040(V) 12.3MP – Pixel Size: 1.55um x 1.55um – IR Sensitivity: Visible light – Interface: 4-lane MIPI CSI-2 – Default Lens Mount: CS-Mount – Frame Rate: (depends on the target platform, maximum fps limit might apply) 1920×1080 @ 60fps 4032×3040 @ 30fps – Board Size: 38mm×38mm – Hole Pitch: Compatible with 29mm, 30mm, 34mmPACKING CONTENTS1pcs 12.3MP IMX477 camera board with dust cap for Jetsons1pcs 11.8″(30cm) camera cable
Arducam for Jetson IMX477 HQ Camera Board, 12.3MP Camera Board for Nvidia Jetson Nano/Xavier NX
€118.99
- Make sure this fits by entering your model number.
- A Can’t-Miss Update to IMX219 – Much better picture quality and lens flexibility, thanks to 53% more pixels, 92% larger pixel size, 192% larger imaging area, and a CS-Mount. Maximum still resolution at 4056 × 3040, frame rates: 30fps@Full 12.3MP, 60fps@1080P.
- Accelerated by Jetson Hardware ISP Engine – Support NVIDIA Argus Camera plugin for H264 encoding, JPEG snapshots, as well as gain, exposure, framerate, and group, hold control.
- Only a driver away from Plug-and-Play – The Raspberry Pi HQ camera module requires hardware modification before installing the Jetson IMX477 driver, which could bring potential damage and void the warranty. Ours don’t.
- 4-Lane Camera for the Future – Route out all 4 data lanes to the camera connector for customized carrier boards with 4-lane CSI connector and future 4-lane camera driver updates.
- NOTE: (i)C/CS Lens is NOT INCLUDED. (ii)Pi 2/3/4/Zero WON’T WORK WITH IT. ONLY THE COMPUTE MODULES DO. (iii) The camera driver MUST be installed: https://github/ArduCAM/MIPI_Camera/releases/tag/v0.0.2; For the new version(R32 4.4), please go to the link: https://github/ArduCAM/MIPI_Camera/releases (iv) It can also be used on the Raspberry Pi Compute Module (like CM3, CM3+), but is not compatible with standard Raspberry Pi models (like Raspberry Pi 3/3B+/4).
In stock
Additional information
| Weight | 0.03 kg |
|---|---|
| brand | Arducam |
| dimensions | 5 x 4 x 4 cm; 32 Grams |