on:
Item Type: Antenna Tuner DIY Kits
Material: PCB
Purpose: Antenna Tuner
Model: ATU-100
Maximum Current Consumption: 400mA
Number of Installed Inductors: 7
Number of Installed Capacitors: 7
Power Measurement Step of 10 Watts: 0.1 watts
Measurement Steps with Power Higher than 10: 1 watt
Power Measurement Accuracy: 10%
Maximum Installation Inductance: 8.53uh
Minimum Installation Inductance: 0.05uh
Maximum Installed Capacity: 1869pf
Minimum Installed Capacity: 10pf
Package List:
1 x PCB Board
1 x Connection Line
1 x IC
2 x Plug
15 x Relay
6 x Capacitance
6 x Porcelain Ring
1 x Coil
1 x Transistor
1 x Diode
2 x Connector
2 x Copper Wire
1 x User Manual
Note:
There are many parts, please be careful and patient when assembling.
Usage Scenario:
The device is intended to be used in the components of amateur radio equipment, as a part of an amplifier or transceiver, or as a separate device that performs the function of matching the output impedance of a power amplifier (PA) with the antenna feeder. This device and the similar 2×5 group The relay is different, which allows it (with the maximum configuration) to work effectively in a wide frequency band, overlapping the radio amateur HF band from 1.8MHz to 50MHz.