Modern televisions and set-top-boxes are sensitive to excessive signal levels. These can be caused by short cable paths or by the use of active multiswitches or amplifiers. A result could be that there are a number of channels that are missing or disturbed. With this attenuator you can reduce the signal level. The attenuation can be adjusted continuously between 0.5 and 20 dB. The damping plate has a DC pass (for the LNB voltage) and can be used in satellite systems, with DVB-T and cable television. Also, control commands such as DiSEqC and Unicable are not affected. The cast housing is high shielded according to class A. The attenuator can be mounted at the output of a multiswitch or antenna socket as well as directly at the receiver (TV or set-top-box).
attenuator
Axing SZU 3-00 adjustable attenuator for Sat with F connectors (20 dB, 0-2400 MHz)
$48.99
- Make sure this fits by entering your model number.
- Adjustable attenuation element for satellite signals, FM, cable TV or others in the frequency range from 0.1 to 2400 MHz
- Prevents interference caused by excessive signal levels and exceeding the TV / satellite receiver.
- The attenuation can be adjusted exactly via the level adjuster (max. 20 dB)
- For mounting on multiswitch, antenna socket or TV, connectors: F-plug to F-socket
- Die-cast housing, DC power pass
In stock
Additional information
| Weight | 0.059 kg |
|---|---|
| ean | 7611682160307 |
| brand | Axing |
| dimensions | 2.5 x 5.5 x 5 cm ; 18.1 g |