Step 1: Knead the clay
Take the sealed clay out of the bag and knead it well for about 2 minutes to make it soft, then knead it into a ball and set aside.
Step 2: Flatten
Put the ball of sealing clay into the middle of the iron box, slowly press it with the palm of your hand to form a round cake, pay attention to the process of pressing evenly.
Pay attention to the pressure process, even force, with a roller will be the surface of the surface of the clay roll flat, no wrinkles.
Step 3: Print the footprints
The baby’s little feet on a good position on the printing clay, on a little force, first press the lower toes, and then press the foot
palm, so that the footprints are clearly printed.
Note: If you are not satisfied with the result, please repeat steps 1-3 immediately.
Step 4: Paste. Put on the jewellery
Satisfied, you can stick around the hand and foot prints on the jewellery engraved with the baby’s name, birthday and congratulations, etc., and then square the seal mud in a cool dry place, let it slowly dry naturally, dry about 20 days or so.
Step 5: Apply gold paint
Gold paint will be applied directly to the hand and foot prints in two coats better, the first brush evenly, wait for the gold paint to dry after the second brush gold paint, drying can be!
Warm tips
1. When pressing the hand and foot prints, press a little deeper and keep it for more than 5 seconds to let the clay set.
2. After the hand and foot prints are finished, they should be placed flat, not covered with a lid or dust cover, and then dried completely in about 20 days. It will take about 20 days to dry completely before you cover it.