specification
CPU: Allwinner H3 Quad-Core Cortex-A7 H265/HEVC 1080P
GPU: Mali400MP2 GPU @ 600MHz, Support OpenGL ES 2.0
Memory \(SDRAM\): 512MB DDR3 (common with GPU)
Onboard memory: TF card \(Max. 64 GB).
Onboard network: 100MB LAN
PoE powerPoE: function support.
Onboard flash 8G eMMC
Built-in WiFi: K016-CW43-SW.
Video decoding: 1080p@60fps, H.264 video encoding 1080p@30fps, H.264
Audio Output: Mini HDMI
Power source: Micro USB with 5V/2A or PoE power supply
USB 2.0 ports: one USB 2.0 OTG
Buttons: power button, reset button.
Low-level peripherals: 40 pin header, compatible with Raspberry Pi 3
Uart GPIO\(1×3\) Pin: UART, Mass
LED;Power LED and Status LED
IR: N/A
Supported operating system: Android Linux
Product size: 65mm x 52.5mm
Weight: 30g
– In the box
Banana Pi BPI-P2 Zero Development Board x1
1 x USB TTL adapter.
– After sale.
Please click on “WayPonDEV” and ask a question or monica#smartfire.cn (f——>@) skype: monica_9122
Please leave the message in our forum at forum.youyeetoo.com/
Banana Pi BPI-P2 Zero Allwinner H3 Cortex-A7 Quad-Core Single Board Computer Onboard 512MB DDR3 SDRAM 8GB eMMC Flash for IoT and Smart Home Support Android Linux
$135.99
- The Banana Pi BPI-P2 Zero Quad-Core Open Source IoT Development Board developed with the Allwinner H3 chip, can also be used directly in H2+ and H5 chip solutions
- Banana Pi BPI-P2 Zero is a small IoT development board, the board size is only 65mm x 52.5mm, built-in Wi-Fi (AP6212) and Bluetooth.
- Banana Pi BPI-P2 Zero It uses a quad-core H3 processor, CPU: Allwinner H3, Quad-core Cortex-A7; 512MB DDR3-SDRAM; 8G eMMC flash on board; Mali400MP2 GPU at 600MHz, supports OpenGL ES 2.0
- BPI-P2 Zero adds built-in 8G eMMC flash, the software can be burned to eMMC and applied directly to IoT products and supports Linux and Android operating systems
- BPI-P2 Zero adds a wired 100M network port, supports PoE function, wireless WiFi and adds PoE network cable power supply function. 40 PIN GPIO, supports UART, SPI, I2C, IO etc. Supports Mini HDMI High Definition Output
- Banana Pi BPI-P2 Zero GPIO Definition is exactly the same as BPI-M2 Zero, with 40-pin GPIO interface, the definition is compatible with Raspberry Pi 3
- Wiki: wiki.banana-pi.org/Getting_Started_with_P2-Zero If you have any questions, please post them in our forum: forum.youyeetoo.com/
In stock
Additional information
| Weight | 0.15 kg |
|---|---|
| Brand | WayPonDEV |