Beninca compatible radio receiver module in housing, 2-channel universal receiver for BENINCA T2WV, T4WV, CUPIDO 4 hand-held transmitters. 12-24V AC/DC, NO/NC 433.92Mhz rolling / fixed code

This universal 433.92Mhz rolling / fixed code 2-channel receiver is 100% compatible with BENINCA T2WV, T4WV, TO.GO 2(4)WV, IO.2WV, CUPIDO 2, CUPIDO 4 433.92MHz remote controls. The 2 channels allow you to operate 2 different garage gates and/or other electronics using your original Beninca remote control. Parameters: 433.92Mhz rolling / fixed code frequency 2-channel receiver memory: up to 400 remotes. Instructions for programming receiver: learning new remotes: press “learn 1” or “learn 2” button – learning LED will go on. Then press the button which you wish to learn on your remote control. Learn LED will start blinking and go off – This means that you have successfully learned your remote to the receiver. Repeat the above steps for other transmitters. Erasing receivers memory–> Press “learn 1” or “learn 2” and keep holding until Learn LED will go off – Once Learn LED is off, it means that you have successfully erased the memory of the appropriate channel. How to connect your receiver: Connect 2 wires of CH1 or CH2 to your control board: 1) COM and N/O, 2) COM and P/P (push button) in parallel to push button. All you need to do is connect this receiver to your control board by using only 4 wires (2 – for power; 2 – for relay). Note: The abriviations of your board may be different, so follow your manual. Video INSTRUCTIONS FOR PROGRAMMING RECEIVER: https://www.youtube.com/watch?v=NfpZvDAadWU&feature=youtu.be . If you want to increase the remote control reception range up to 150-200 meters, then you can connect this aerial: https://www.store.de/dp/B01MTOYB0F . If you have any questions about your purchase, please contact us