e Soldering Wire with Rosin Core for Electric Soldering and DIY
– Solder wire with rosin core, Smooth Soldering point and effectively antiaxidant.
– With strong electrical and thermal conductivity, it melts fast and has less splash.
– Flux Rosin 1.7-2%, flows well and heats evenly, easy to use.
– When you solder something, this can be used to fill in the surface and gap of the electronic device with the metal as a filler, and the fixed electronic device becomes the main part of the solder.
Specification:
– Material Compositions: Sn 99.3%, Cu 0.7%
– Rosin Core: Flux 2.0%
– Melting Point:215 – 220℃/ 419 – 428 ℉
– Elongation Rate: 58%
– Expansion Rate: 78%
– Solder Net Weight: 90 grams (0.2 lbs / 3.17 ounces)
– Solder Wire Diameter: 0.3 mm (0.012 inch)
Package Inculded:
1x Solder Wire How to Use:
– Prepare solder wire and electronic soldering iron.
– Contact the soldering iron with solder joint.
– Place the solder wire on the solder joint when the weld metal is heated to the temperature that the solder can melt.
– When a certain amount of solder has melted, remove the solder wire.
– Remove the electronic soldering iron at an angle of about 45 ° when the solder joint has been completely wetted with solder.
Kindly Note:
– Ensure the power cord is in good condition and the welding head is not loose before soldering.
– For prolonging service life, please switch to the 200°C model when not using it temporarily and don’t let the soldering iron stay at high temperature all the time.