1arance size: 51.5mm*37mm
2. Mounting size: 43.85mm hole pitch, M3 screw holes*2
3. Microprocessor: ARM Cortex-M0 STM32F072C8T6 48MHz
4t voltage: DC12V-DC24V 6A
5. Logic voltage: DC 3.3V
6. Heating interface: heating rod (E0), maximum output current: 5A
7. On-board sensor: ADXL345
8. Fan interface: two CNC fans (FAN0, FAN1)
9. Fan interface maximum output current: 1A, peak 1.5A
10. Expansion interfaces: EndStop, I2C, Probe, RGB, PT100/PT1000, USB interface, CAN interface
11. Motor driver: TMC2209 on board
12. Driver operating mode: UART
13. Stepper motor interface: EM
14erature sensor interface: 1 way 100K NTC or PT1000 (TH0), 1 way PT100/PT1000 optional
15. USB communication interface: USB-Type-C
16 5V output max. current: 1A
This product is currently only supported by Klipper firmware.
BIGTREETECH EBB 36 CAN V1.1, Shield for Connecting Klipper Expansion Device, TMC2209 on Board, Supports CANBUS Communication, Developed on the STM32G0B1CBT6 Chip, Multiple Security Protection
$81.99
- ✅【Simplified operation】The motherboard is pre-programmed with BOOT and RESET buttons so that users can enter DFU mode via USB to update the firmware. The I2C interface is reserved, this port can also be used for broken or blocked material detection or for DIY operation of other functions.
- ✅【Safety protection】Increased thermistor part of the protection circuit to prevent the main control chip from burning due to the leakage of the heater bar; additional ESD protection chip for the USB port to prevent the main control from being knocked out by the static electricity of the USB port; USB power on is selected by jumper caps to effectively isolate the motherboard DC-DC from USB 5V.
- ✅【Dual interface】Support CAN or USB communication, where the CAN terminal resistance 120R can be selected by jumper caps, and reserved for CAN expansion interface.
- ✅【Anti-reverse connection protection】Anti-reverse diodes are added to the heating rod and fan ports to effectively protect the MOS tubes from being burnt by reverse voltage. Anti-reverse connection protection for the power supply interface.
- ✅【Package】Includes terminals, female reeds, double pass studs and screws required for DIY. If you encounter problems during the use of the product, you are welcome to contact me. A professional product engineer will be able to answer them for you.
In stock
Additional information
| Weight | 0.04 kg |
|---|---|
| brand | BIGTREETECH |
| dimensions | 9.5 x 5.8 x 3.4 cm; 40 Grams |