Octopus V1.1 board features:1. Support 3d printer: CR10, CR10S, CR10S Pro V2, CR10 V3, CR10 V2; Ender 3, Ender 3 V2, Ender 3 Pro, Ender 5 plus, Ender 5 Pro.2. Display screen: BIGTREETECH TFT35, TFT24, LCD12864, LCD2004, etc.3. Adopt Type-C interface, support online printing. The system supports simplified Chinese, English and other languages.4. Adopt dedicated power chip, support 24V power input.5. Upgrade configuration firmware through SD card, easy to operate and efficient. Support SD card offline printing and USB online printing.6. Using high-performance MOSFET tube, better heat dissipation effect.7. The use of pluggable fuses makes the replacement process easier.8. Reserved dual Z-axis printer.9. Support DFU to update firmware.10. Onboard EEPROM (AT24C32).11. Reserved WIFI interface (ESP8266), need firmware support.12. Reserve PT100 thermistor interface. Reserved for you, you can diy by yourself and use your imagination.13. Thermistor leakage protection, we have done an upgrade here to further protect the motherboard.14. Expanded interface function support: BL Touch, material interruption detection, locked-rotor detection, RGB, resume printing after power failure, shutdown after printing, etc.15. Support U disk function; IIC expansion; support SPI expansion, can be connected to SPI-based expansion modules such as MAX31865 module; support CAN bus, use 6P6C RJ11 interface, easy to expanderboard parameters:1. Appearance size: 160 x 100mm, installation size: 150 x 90mm.2. Input voltage: DC24V.3. Temperature sensor interface: TB, T0, T1, T2, T34. PC communication interface: Type-C, easy to plug and unplug, communication baud rate 1152005. Mainboard power connection method: use switching power supply for power supply. The mainboard needs three power supplies for power supply, namely motor power supply, general power supply, and hot bed power supply. 6. Support file: G-code
BIGTREETECH Octopus V1.1 Control Board + PI TFT50 Touchscreen + 8 TMC2209 Drivers for 3D printer Upgrade Spider Compatible Marlin 2.0 and Klipper Firmware
$380.99
- 1.【Powerful】Support 8 groups of stepper motor drives, 9 motor interfaces. It is convenient for you to choose the driver you want to use. The motherboard supports different types of drivers to work at the same time, you can experience the fun of DIY.
- 2.【Fast heat dissipation】Support 6 controllable fans, 2 normally open fans, each fan can independently select the power supply, and all support 5V, 12V, 24V. You can freely choose the fan model to facilitate your printing work. The Octopus board will dissipate heat faster and prolong its service life.
- 3.【PI TFT50 Touch Screen】PI TFT50 V2.0 Raspberry Pi LCD Capacitive Touch Screen. Supports Raspberry Pi DSI Display Interface Direct Drive and 5 Points Touch. Maximum working current: 320mA. Screen current: 100mA. Working voltage: 3.3V (provided by the Raspberry Pi display interface). PI TFT50 can only be used with Raspberry Pi.
- 4.【PI TFT50】800*480 resolution, display area up to 108×64.8mm. The display adopts Raspberry Pi power supply design without external power supply. The display also supports hardware backlight adjustment, and the backlight brightness can be adjusted by rotating the potentiometer behind the screen. The unique hole design on the back allows the Raspberry Pi to be installed directly.
- 5.【TMC2209 Driver】Avoid engine shaking. The motor is not easy to lose step, ultra-quiet mode. A large surface thermal pad, reduce the temperature of driving work. Support STEP / DIR and UART mode.
In stock
Additional information
| Weight | 0.5 kg |
|---|---|
| brand | BIGTREETECH |
| dimensions | 20.8 x 11.8 x 7.9 cm; 500 Grams |