Bike Repair Multitool Kit, Tire Repair Tool kit, Bicycle Fixing Multitool Kit Contains 16-in-1 Tool with Patch Kit & Tire Levers Bike Accessories, Used for Road Bikes & Mountain Bikes

Tyre Repair Method_Content
Tyre Repair Kit with tyre leversPry Bars – Extra Large
Tyre Repair Kit with tyre leversPry Bars offers a complete, quick fundamental solution for when you encounter that dreaded flat tyre.
Use and Care: Detach the wheel from the bicycle. Remove the valve cap and retaining nut. Utilise the included tyre leverspry bars to detach the tyre. Insert the tyre leverspry bars between the tyre and wheel rim directly opposite the valve. Engage one leverpry bar under the tyre bead and engage the second leverbar 1-2″ (30-50mm) from the first, then pull both leversbars toward the spokes to lift the bead off the rim. Disengage one leverbar, move it two inches (5cm) along the rim, engage it in the bead, and pull to lift the next section of the bead off the rim. Repeat engaging the leverbleverar until the bead loosens, then slide the leverbar along the rim under the bead until the tyre comes free of the rim on one side. Avoid using sharp objects like screwdrivers or knives, which could damage the tyre or tube. Remove the tyre and run your fingers along it carefully to check for thorns or glass. Remove the inner tube and slightly inflate it – this makes it easier to identify the hole by listening for escaping air. Once located, mark the hole using the included marker pen. Use the sandpaper to roughen the area around the hole. Apply enough glue to cover an area slightly larger than the repair patch needed. Let the glue dry before applying the patch. Remove the foil from the back of the repair patch and centre it over the hole, pressing down firmly for 60 seconds. Grate the included chalk around the patch to absorb any excess glue. Re-insert the tube, tyre, and wheel.