ility: Oil filler hose bridge tube kit is replacement for Seastar inboard, fit for outboard hydraulic steering systems.
2. Function: Hose is used for refilling your boat’s steering system fluid, and keeps the entire steering system sealed during the deflation process.
3. Tough Material: The bleed kit is made of PVC, ABS and copper material, practical and durable, high toughness, proof and long service life.
4. Performance: Flexible oil filler hoses bring you reliable performance to meet your use needs, professional and dependable.
5. Easy Using: Oil filler hose allows the marine mechanic to save more time in the oil change process, professional and efficiency.
Specification:
Item Type: Oil Filler Hose Bridge Tube Kit
Material: PVC, ABS and copper
Bridge Tube Inner Diameter: 9mm/0.35 inch
Bridge Tube Length: 47.5cm/18.7 inch
Bridge Tube Outer Diameter: 10mm/0.39 inch
Filler Hose Thread Size: 1/4 NPT
Filler Hose Hole Diameter: 8mm/0.31 inch
Filler Hose Length: 44cm/17.32 inch
Filler Hose with Screw Cap Diameter: 26mm/1.02 inch
Filler Hose with Screw Cap Outer Diameter: 12mm/0.47 inch
Application:
Replacement for Seastar inboard, fit for outboard hydraulic steering systems
Used for refilling your boat’s steering system fluid.
How to Use:
1. Connect the bottle to the helm reservoir (do not puncture the bottle) (do not leave the bottle empty).2. Connect the bridge tube to the fitting on the steering cylinder and loosen the fitting.3. Use the rudder to pump fluid through the system by turning the wheel in one direction. The bubble will be pushed into the reservoir at the helm.4. Manually swing the outboard through the full articulation to release trapped air.5. Note: Positioning the fittings upward while pumping fluid with the rudder will allow air to escape from the cylinders.6. Repeat as necessary 3‑4 times until no air is visible in the bridge tube.7. Tighten fittings before removing