Bompar Componentes PCH 220 –  Bicycle Kit

Retreading kit for tyres with large punctures that cannot be filled using anti-puncture liquids. Rapid-stick process (5-10 minutes). External retreading, with no need to remove the tyre. The tyre can be used until it is worn and needs to be changed. Compatible with our anti-puncture product made from natural rubber particles. Instructions: clean the puncture in the tyre that is to be repaired. It is not necessary to undercut or remove the tyre from the bicycle. Shake the container, as the retread solution needs to be well mixed with the glue and the rubber particles. Apply 1 coat of the bonding solution directly to and around the puncture, and quickly spray it with the rubber particles.(leave to dry for 3 minutes) Apply another coat of the solution on top of the rubber particles, and spray it again with more rubber particles.(leave to dry for 3 minutes). If necessary, repeat the process again to increase the thickness of the retreaded area. Wait an additional 3 minutes, and then pressure can be applied to the tyre and you are ready to ride. Remember that you must carry anti-puncture liquid to close the small holes that may remain after retreading. As you use the bike and the tyre becomes worn, you can apply another coat to the same puncture you repaired, using the same retreading process. Anti-puncture liquids are completely compatible with both the solution and the rubber particles, so any hole or puncture that appears in the patch can be plugged again using these liquids. Plugs 100% of tyre punctures. Contents: bonding solution, glue nanoparticles.