Booster Pump, Easy Installation Water Pressure Booster Pump Automatic for Bathroom UK Plug

Fully Automatic: The automatic sensor switch is controlled by the water . Before turning on the water pump, please turn on the faucet to ensure that there is water flowing through the water pump.
2. Water Shortage Protection: When the water pressure in the water inlet of the water pump is close to 0, the water pump will stop working and the automatic protection will be turned on.
3. High Performance: The booster pump has a maximum of 4.4 GPM, a maximum lift of 60ft, and an input power of 80W, which is powerful yet energy efficient.
4. Wide Compatibility: The compatibility of the booster pump is very good, the requirements for the water heater are low, and the water heater with or without a water tank can be used.
5. Low Noise: The sound of the booster pump is low and will not disturb your neighbors, which is very suitable for home use.

Specification:
Item Type: Water Pressure Booster Pump
Material: ABS, red copper
Product Model: MT24 20 80P
Working Voltage: 24V
Voltage: 100-240V
Insulation Class: ClassH
Supercharging Effect: 80Pa
Noise: Low
Open Mode: Automatic water control
Head: Approx. 20m / 65.6ft
Piping Inner Diameter: Approx. 15mm / 0.6in
Medium Temperature: 0-65℃

How to Use:
Direct installation and use

Package List:
1 x Water Pressure Booster Pump1 x Power Adapter
1 x Water Pipe
1 x Instruction
2 x Hook

Note:
1. The water pump has a built‑in water switch valve. The minimum rate of 1.5L/min is required to open the valve to start the pump. If the water switch cannot be opened, the power supply must be disconnected again for 3 to 5 seconds and the water pump will be forced to start for 10 seconds. Power on and work for 10 seconds, it will automatically stop, indicating that the water switch valve is not open.
2. Test Method: Take a mineral water bottle and connect it. Generally, a mineral water bottle is a 500ml bottle, and about 3 bottles